Installation

How to apply your ELITE.

Have your phone and the box at hand. Watch the video first, then follow the steps at your own pace.

Have your phone and the box at hand and follow the steps below at your own pace.

Have your phone and the box at hand and follow the steps below at your own pace.

In the box
  • Cleaning wipe (wet)
  • Microfibre cloth
  • Dust removal sticker
In the box
  • Precision applicator
  • Cleaning wipe
  • Microfibre cloth
In the box
  • Cleaning wipe
  • Microfibre cloth
  1. Find a dust-free spotWork indoors in a clean room with little dust in the air, with clean, dry hands.
  2. Clean your screenFirst with the wet wipe, then dry and streak-free with the microfibre cloth.
  3. Remove the last dustUse the dust sticker for the last specks, just before you apply the glass.
  4. Place the glass straightHold the glass by its edges, line it up with the edges of your screen and lay it down in one go.
  5. Smooth it downUse the microfibre cloth to smooth from the centre towards the edges until all the air is out.
  6. Clean the cameraWith the cleaning wipe, then dry with the microfibre cloth. No dust on the lenses.
  7. Place the applicator on the cameraThe precision applicator fits over the camera unit, with each lens protector right above its lens.
  8. Press downPress each lens protector down firmly and carefully remove the applicator.
  9. Clean the cameraWith the cleaning wipe, then dry with the microfibre cloth. No dust on the lenses.
  10. Align the frameHold the frame by its edges and place it straight over the entire camera unit.
  11. Press down firmlySmooth from the centre towards the edges, so the glass adheres well everywhere.

Help

Not quite right?

There are bubbles under the glass

Smooth them out with the microfibre cloth, from the centre towards the nearest edge.

There is a speck of dust under the glass

Carefully lift the glass a little on that side, remove the speck with a dust sticker and lay the glass back down straight away.

My fingerprint sensor responds less well

Register your fingerprint again after applying your ELITE.

Does ELITE fit under my case?

Yes. ELITE is case-friendly: the glass leaves room for your phone case.

Still stuck?

Get in touch via our contact details and we will help you further.